Cement Plant Chute and Hopper Lining – Oman
Oman · Quarrying & Cement
Overview
Stancor Special Steel supplied Stanhard 450 and Stanhard 500 in 10 mm & 12 mm for clinker chute, hopper and feed-boot lining on a 5,000 TPD line in Oman. Plate was rolled, quenched and tempered to Stancor specification at our contracted OEM mills and released against EN 10204 3.1 certificates.
The challenge
The customer needed clinker chute, hopper and feed-boot lining on a 5,000 TPD line that would hold tolerance through cutting and forming, arrive on a fixed fabrication slot, and be fully traceable to a heat number — with no re-treatment required after welding.
What we did
We released 95 MT of Stanhard 450 and Stanhard 500 in 10 mm & 12 mm, shot blasted and primed, cut to the fabricator's nest, and shipped against the build programme with mill test certificates, hardness or mechanical reports and — where applicable — firing-test records.
Project data
| Grades supplied | Stanhard 450 and Stanhard 500 |
|---|---|
| Thickness | 10 mm & 12 mm |
| Quantity | 95 MT |
| Delivery condition | Quenched & tempered, shot blasted and primed |
| Certification | EN 10204 3.1 mill test certificate |
| Standards | EN 10029, EN 10204 3.1, DIN EN ISO 6506-1 (Brinell) |
Standards applied
- EN 10029
- EN 10204 3.1
- DIN EN ISO 6506-1 (Brinell)
Scope supplied
- Stanhard 450
- Stanhard 500
Related
- Stanhard 450
- Stanhard 500